About Earth’s New Little Moon

After putting in its time, an asteroid called “Asteroid 2016 HO3” has now been confirmed by NASA to be a permanent resident in the Earth’s gravitational field.

The asteroid was discovered earlier this year by University of Hawaii’s Institute for Astronomy, but it has been a “stable quasi-satellite” for almost 100 years.

Asteroid 2016 HO3 is between 120 and 300 feet in diameter (40-100 meters). The asteroid poses no threat of hitting the Earth, and will never come closer than 14 million kilometers (9 million miles) from our planet.

(For point of comparison, the average distance to the moon is less than 400,000 km.

Asteroid 2016 HO3 orbits the Earth somewhat similarly to our regular moon, but in an uneven pattern in which the rock drifts ahead of the Earth for a couple years as both orbit the sun, before the Earth’s gravity pulls the rock back and it falls behind the Earth for a few years. The relationship between the Earth and the asteroid has been likened to a dance.

Image: Paul Chodas, NASA and the Jet Propulsion Laboratory

New mathematical law found to beautifully explain crowd phenomena

A new law of science has been found to beautifully explain crowd movements for first time. The as-yet unnamed law, which is a mathematical, universal power law for human interactions, was found by U of M researchers who analyzed complex datasets that have only recently been available. The movement of crowds is fundamentally anticipatory in nature, according to the researchers, and the new, simple energy law expresses, in the words of its lead author, “the beauty of human nature.”

“The law we identified is brand new; such a law would have been impossible to identify 10 years ago as we simply did not have the technology to track pedestrian crowds at a large-scale,” Dr Ioannis Karamouzas, Research Associate at the University of Minnesota’s Department of Computer Science and Engineering and first author of the report, told The Speaker.

New law of science found to beautifully explain crowd phenomena

Dr Ioannis Karamouzas

“Nowadays, though, in the era of big-data there is a plethora of publicly available human crowd data. By analyzing such data, we found that, unlike particle-based interactions, the interactions between pedestrians are anticipatory in nature,” Karamouzas told us, referring to previous models that had attempted to predict crowd behavior with data based on repulsive particles rather than humans.

“To be more specific, when two particles interact the amount of energy that they have to expend to avoid colliding with each other depends on how close they are. In contrast, when two pedestrians interact, their energy depends on the ‘time-to-collision,’ i.e., the time that it takes for the pedestrians to collide assuming that they do not change course; as a collision becomes more imminent, this energy increases drastically.”

Karamouzas and his team have discovered a universal parameter based on single variable that explains crowd movement.

New mathematical law found to beautifully explain crowd phenomena“Surprisingly, the relationship between interaction energy and time-to-collision consistently follows a simple mathematical law stating that the degree to which two pedestrians are willing to respond to each other is inversely proportional to the square of their projected time-to-collision.”

Karamouzas elaborated on the types of crowd phenomena that could be explained by the new law.

“This law is broadly applicable as it consistently holds across different crowd settings; we analyzed both sparse and dense human crowds and found that pedestrian interactions follow the same power-law relationship. Our law has allowed us to gain a better understanding into how human behave and interact in a crowd.

“Looking into the future, I believe that such a law will have broad applications into our everyday life, from simulating in a more accurate way pedestrian behaviors in games, training simulators and animated movies, to designing safer buildings and pedestrian facilities.”

Karamouzas also explained how a law could so simply cover such range in speeds, densities and situations.

“That’s the beauty of the human nature! Every person in a crowd is certainly unique with his/her own desires and individual goals. What our law captures is how people adapt their courses in response to others around them. And such adaptations directly follow from the psychology of anticipation. As we move through a crowd our brain is able to process visual and acoustic cues and recognize the future consequences of our actions allowing us to react accordingly. And it’s the interaction between each person’s individual goals and our inferred law that allows pedestrians to exhibit such a large variety of behaviors.”

The law could not have been found in the past, due to the complexity required of the analysis.

“When we move in a crowd, we typically experience a complex system of competing forces,” said Karamouzas. “On one hand we have a goal that we are tying to reach–e.g. grocery store–and on other hand we try not to bump into other people. On top of that, we hardly ever walk alone but in small groups–such as couples, families, friends, etc. As such, we have to account for all these factors and continuously make our own decisions, which makes very hard to isolate/identify the primary rule that describes our interactions in a crowd. Much of the work in our paper was developing a new analysis technique which can account for the effect of all these forces simultaneously. Because the technique we employed was statistical in nature, we needed to analyze thousands of trajectories to robustly determine the pedestrian interaction law.”

Karamouzas went into detail about how his team found the law.

“We turned into a large collection of publicly available pedestrian datasets that are nowadays available thanks to the advances in automated tracking and computer vision,” said Karamouzas. “Overall, we analyzed six datasets New mathematical law found to beautifully explain crowd phenomenaconsisting of students walking in college campuses, pedestrians interacting at commercial streets, and a few controlled experiments where participants navigate through narrow bottlenecks.

Previously, there had been formidable challenges facing researchers who wanted to find an accurate and general rule for pedestrian behavior.

“To overcome the challenges that I mentioned already and robustly quantify the interaction law of pedestrians we employed a novel approach rooted in condensed matter physics. We initially measured the probability that any pair of pedestrians in the data has of maintaining a certain separation distance. We basically hypothesized that similar to charged particles, the interaction between pedestrians is distance-dependent. However, we found that the probability plots were very different for different walking speeds; when two pedestrians approach each other very fast they tend to maintain a larger separation distance than when they move slowly, as opposed to particles. As such, we started looking into different variables that can describe the interactions between pedestrians and we found that the time-to-collision is a sufficient descriptor. The probability plots were the same for different speeds as well as different orientations at which pedestrians approach each other. In addition, the time-to-collision measure naturally accounts for pedestrians coming relatively close to one another when moving in roughly the same direction–e.g. a pair of friends walking line-abreast. Eventually, by analyzing all the data, we inferred a simple energy law for the interactions between pairs of pedestrians.”

The research is considered to hold new promise for improved public architecture and spaces, the failings of which in the past have caused deaths.

“First of all, the nice thing about our newly identified law is that it directly implies an accurate model of simulating crowd flows. And through such simulations, we can design safer buildings as well as improve the efficiency of New mathematical law found to beautifully explain crowd phenomena (4)existing facilities–e.g., better egress times at a stadium. Furthermore, our novel way of analyzing crowd data and directly measuring the “interaction energy” between pairs of pedestrians opens interesting avenues for future work. For example, we would like to analyze crowd data from mass gatherings, such as concerts, and see how the interaction energy can be used to identify critical areas preventing the likelihood of crowd disasters–like the Love Parade in 2010).

Karamouzas commented on what he thought may be the most important thing for readers to understand of the research.

“The main take-away message is that a lot of the complexity of pedestrian interactions can be captured using simple mathematical equations. The universality of how pedestrian respond to each other is really surprising, and understanding this can lead to more accurate simulations, safer building designs, and shed some light into the anticipatory nature of human interactions.

The report, Universal Power Law Governing Pedestrian Interactions, was authored by Drs. Ioannis Karamouzas, Brian Skinner, and Stephen J. Guy, and was published in Physical Letters Reviews last week.

By Justin Munce

Feature image: Karl Baron

Images belong to the work of the researchers

VIDEOS from the researchers

Agents positioned at two concentric circles have to walk to their antipodal points.

Self-directed agents form collective patterns.

Bi-directional flow through a corridor.

The “busiest intersection in the world,” Shibuya Crossing, Tokyo, Japan (LIVE)

Material advantage: new metal matrix may cause marine engineers to switch

Metal sea wreckage might be made to float

The development of a new metal matrix composite foam may tip the balance back towards metal materials in the construction of marine vehicles — in addition to offering heat resistance well beyond that of the fiberglasses common in the industry today. According to NYU engineers, the first lighter-than-water metal construction foam can withstand significant pressure and three times as much heat as fiberglass.

“This is the first time anybody has been able to achieve density of the composite lower than that of water to create naturally buoyant materials,” explained New York University Polytechnic School of Engineering’s Dr. Nikhil Gupta.

Dr. Nikhil Gupta

Dr. Nikhil Gupta

The metal matrix composite is a magnesium alloy reinforced with spherical silicon carbide particles. The density — 0.92 grams per cubic centimeter versus water’s 1.0 – still allows the material to withstand 25,000 pounds per square inch of pressure before rupturing.

Some of the strength of the material is due to the hallow particles embedded in the material, which absorb energy during a fracture. With different measures of spheres added to the matrix, various densities can be created.

“The spheres are manufactured by our industrial partner Deep Spring Technology, Toledo, OH, USA,” noted Gupta, an expert in mechanical and aerospace engineering.

GUP_3482Spheres were the shape of choice for the foam. “This company also has capabilities of manufacturing hollow particles of many other shapes,” said Gupta, who referred to two other types of particle shapes — made of silicon carbide [gray color] and alumina [white color].

GUP_3486 - Copy“Spherical particles have advantage that their properties are the same from any side. Particles of different shapes need to be used with more caution with regard to loading them along their strongest direction.”

The light-weight heat-resistant material is also expected to offer potential improvements in fuel economy for land transportation. The ability of metallic materials to withstand high temperatures is one of the main selling points, Gupta noted.

“Some of the competing materials are polymer matrix composites, commonly known as ‘fiberglass.’ One of the limitations of fiberglass materials is that they cannot be used over 150 degrees Celsius because polymer will degrade or burn. In addition, fire, smoke, and toxicity are concerns when polymers are exposed to high temperature. Magnesium and Magnesium matrix composites can be used up to about 500 degrees Celsius. Automotive components such as pistons, connecting rods, exhaust systems and structural components can be made of lightweight Mg matrix composite materials. High temperature in many of these components prohibits use of polymer matrix composites.

“The Magnesium-hollow sphere composites that we have developed also absorb a large amount of energy under compression. This property is desirable in automotive energy absorber components in cursing zones. These foams can also be filled in A and B-pillars of cars, and doors for side impact energy absorption.”

The technology may be put into use in prototype automobiles and boats within three years, as well as in amphibious vehicles developed by the US military, where currently the trend is toward other materials, although experts consider that the new lightweight product may again give metals a material advantage.

“Weight reduction in transportation applications can help in reducing the fuel consumption,” Gupta told us. “In addition, the high energy absorption capability per unit mass in these materials can also help in making vehicles safer. However, one material cannot be used to make all components, we need to find the components that will benefit the most from these new materials.

The report, “Dynamic Properties of Silicon Carbide Hollow Particle Filled Magnesium Alloy (AZ91D) Matrix Syntactic Foams,” was completed by Harish Anantharaman, Vasanth Chakravarthy Shunmugasamy, Oliver M. Strbik III, Nikhil Gupta and Kyu Cho, and was published in the International Journal of Impact Engineering.

By Sid Douglas

← Previous post

Next post →

Comments are closed.